Sika® Cemflex®
Sika® Cemflex® is an acrylic based emulsion, which improves the water resistance, and adhesion of Portland cement based composites.
- Watertight
- Ideal for submerged or subterranean waterproofing
- Good abrasion resistance
- Non - toxic
- Oil resistant
- UV stable
Usage
Sika® Cemflex® mixed with Portland cement and water forms an effective waterproofing slurry that is used in conjunction with Cemflex® Fabric for:- Reservoirs
- Shower floors and walls
- Balcony and veranda floors (under tiles)
- Retaining walls
- Plaster
- Render
Advantages
- Watertight
- Ideal for submerged or subterranean waterproofing
- Good abrasion resistance
- Non - toxic
- Oil resistant
- UV stable
Packaging
5, 25, 200 and 1000 ltr Containers
Fabric: Available in 250M rolls (size of roll may vary at times)
Colour
Liquid - Off white (Pale Grey)
Product Details
Composition
Blend of liquid Polymers
Shelf life
12 Months in original, unopened container.
Storage conditions
Store in a dry area between 5ºC and 35ºC. Protect from direct sunlight.
Density
Approximately 1.04kg/litre
pH-Value
+ 8.0
Mortar mix design
Sika® Cemflex® | Water | Portland Cement | Yield |
1 litre | 1 litre | 3.4kg | 3.2 litre |
5 litre | 5 litre | 17kg | 16 litre |
25 litre | 25 litre | 85kg | 80 litre |
Application
Ambient air temperature
Min. 5°C – Max. 35°C.
Substrate temperature
Min. 5°C – Max. 30°C.
Consumption
Usage | 1L Cemflex produces | Total Coverage |
Waterproofing slurry | 3.2 litres | 1m2 (with membrane) |
Bonding | 4.5 litres | 8 - 10m2 |
MIXING
Waterproofing
Mix the required amounts of Sika® Cemflex® and water first, add the correct quantity of Portland cement slowly, while mixing, to avoid the formation of lumps.
Mixing can either be achieved manually or mechanically, with small quantities of 5litres and less. Larger quantities should be mechanically mixed with a slow speed mixer (set at 400-600 rpm). Mixing should continue until a uniform, lump-free consistency is obtained. The slurry should be mixed periodically during application to prevent settlement.
Bonding/Bagging mixing
Sika® Cemflex® and water are mixed in equal proportions by volume. Mix clean building sand with Portland cement in equal proportions by volume and then add sufficient diluted Sika® Cemflex® and continue mixing until a uniform, lump-free consistency is obtained. Mix periodically during application to prevent settlement.
CLEANING OF EQUIPMENT
Remove uncured Sika® Cemflex® slurry from tools with water. Cured material can only be removed mechanically.