Product Data Sheet Show all documents

Sika® ViscoCrete®-10

HRWR – High Range Water Reducer with retardation effect

Sika® ViscoCrete®-10 is a third generation superplasticiser for concrete and mortar. 

Sika® ViscoCrete®-10 is a powerful superplasticiser which acts through several different mechanisms including surface adsorption and sterical effects separating the cementitious binder particles. The following advantageous properties are achieved:
  • High water reduction, resulting in high density, high strength and reduced permeability
  • Superior plasticising effect, resulting in improved flow, placing and compaction characteristics
  • Reduced shrinkage during curing and reduced creep when hardened
  • Suitable for use in reinforced and prestressed concrete structures.
Product Data Sheet Show all documents

Usage

Sika® ViscoCrete®-10 is mainly used for the following applications:
  • Concrete with ultra high water reduction (up to 20%) and improved flow
  • High performance concrete
  • Concrete in hot weather and with extended transportation and workability requirements
 

Advantages

Sika® ViscoCrete®-10 is a powerful superplasticiser which acts through several different mechanisms including surface adsorption and sterical effects separating the cementitious binder particles. The following advantageous properties are achieved:
  • High water reduction, resulting in high density, high strength and reduced permeability
  • Superior plasticising effect, resulting in improved flow, placing and compaction characteristics
  • Reduced shrinkage during curing and reduced creep when hardened
  • Suitable for use in reinforced and prestressed concrete structures.

Packaging

5 litres, 25 litres, 200 litres, and 1000 litres containers

Colour

Light brownish liquid

Product Details

Sustainability / Certifications / Approvals

APPROVALS / CERTIFICATES

Sika® ViscoCrete® 10 meets and exceeds all requirements of Australian Standard 1478.1-2000 for High Range Water Reducer Retarder Admixture (HRWRRe).
Product Information

Composition

Modified polycarboxylate in water.

Shelf life

12 months from date of production if stored properly without interference.

Storage conditions

In dry conditions at temperatures between +5°C and +30°C. Protect from direct sunlight and frost.

Density

Density: 1.06 kg/l (at +20°C) approx

pH-Value

4.3 ± 0.5

Total chloride ion content

≤  0.1 %
Technical Information

Concreting guidance

The standard rules of good concreting practice, concerning production and placing, are to be followed. Laboratory trials shall be carried out before concreting on site, especially when using a new mix design or producing new concrete components. Fresh concrete must be cured properly and curing applied as early as possible.

Application

Application Information

Compatibility

Sika® ViscoCrete® can be used in conjunction with all the admixtures manufactured by Sika Kenya Limited with the exclusion of Sikament ® NNG.

All admixtures must be added separately.

For additional information, please contact Sika technical personnel.

Note: Always conduct trials before combining products in specific mixes.

DISPENSING

Sika® ViscoCrete®-10 is added to the gauging water or added with it into the concrete mixer.

To take advantage of the high water reduction, a wet mixing time, which is depending on the mixing conditions and mixer performance, of at least 60 seconds per cubic metre after the admixture addition is recommended.

To avoid excess water in the concrete, the final dosage must begin only after 2/3 of the wet mixing time.
Consumption

Recommended dosage

Recommended dosage for concrete: 0.4 - 1.5% by weight of cement.

Documents